Photographic Quality directly printed on the back of Plexi up to 200 x 300 cm
Very High Quality due to 6 color printing + White

UV Plexi Full White

High Quality Printing
Full or partial
With/without white layer

UV Plexi Entretoises White

Alu Spacers
Pre-drilled holes
Wall mount

UV Plexi Select White

Selective White
Behind the logo or image,
the rest is transparent

Menu Plexi Dibond Diasec

Printed on Plexi
With Dibond Back
Ideal for Outdoor Use

Menu UV Plexi Lightbox

Ideal for Lightboxes
Diffuse White primer layer

Choice of Opaque or Transparent (diffuse) Rear White Ink Layer
Choice of Selective Opaque White (only on logo, etc) and/or Transparent Edges

Direct UV printing under Plexiglas, methacrylate plate, with Greenguard Gold ecological inks —

Note : Printing on the back of plexi is not comparable in quality to an artistic Diasec where Fine-Art paper is always used.

At, Plexi is printed in colour on the back. This can be done either with an underlying opaque white ink layer or with a transparent (diffuse) white ink layer.
The underlying opaque white ink layer can completely or selectively follow the image, logo or texts.

The underlying transparent (diffuse) white ink layer is used to create a light box transparent.

This is done with inks that cure under UV light and have a shelf life of several years. The inks are weather-resistant and to a certain extent scratch-resistant. The appearance of the plexi on the front is shiny with free polished edges.

To adapt your images to one of the proposed solutions, our technicians will be happy to help you prepare your image to achieve the desired effect.

Plexi printed on the back with a White Opaque Ink Layer that only follows the Logo or Text

Logo printing with support white, selective white, under Plexiglas —


Direct printing on the back of Plexi with a white opaque ink layer that selectively follows your image, logo or texts. The remaining part remains transparent.

The borders are polished for free to give your plexi sheet a glamorous effect.

The holes for attaching the spacers are milled digitally so that they are in precisely the desired position without drill damaging.

Our technicians will be happy to help you adjust your image digitally to achieve the desired result.

Plexi at the back of the image printed with an Opaque White Ink layer and Transparent borders

You can add a transparent border to your image during the Online ordering process.

The transparent edge will be added to your image size. Nothing will be cut away from your original image.

You can choose from the following widths: 1, 2, 3, 5, 8, 10 and 12 cm.

Direct UV printing of an image with an opaque white undercoat and transparent edges under Plexiglas -

Plexi printed on the back and finished with a Dibond back is Ideal for Outdoor use

Plexi printed on the back and finished with a Dibond back is Ideal for Outdoor use -

An image that is printed on the back of plexiglass can be finished with a 2 mm Dibond on the back. We print a white ink layer on the back of the image so that the glue applied for mounting the Dibond back is not visible.
All our suspension systems can be used. Both our professional and simple suspension systems.

Benefits :
The Plexi/Dibond version remains extremely flat with large dimensions. It is also suitable for outdoor use because it is protected at the back. It can withstand all weather conditions.
The Plexi/Dibond version can also be used in damp areas (Swimming pools - Sauna -Fitness etc..)

Delivered complete with adapted Hanging System - Ready to Hang

Depending on the product, you can - during your order - choose between a Professional or a Simple Hanging System.
Depending on the dimensions and weight, the online system will propose the most obvious solutions:

Professional Hanging Systems :
Are the Hidden Aluminum Hanging Frames with reinforced corners, as shown here on the right.

Simple Hanging Systems :
Spacers - Hanging Hooks - Velcro Systems etc....

Simple hanging systems -
10/45 invisible suspension system —

Aluminum Suspension System 10/45 with wall batten (in red)

Plexiglas printed on the back with a rear Transparent (diffuse) White Ink Layer to obtain a Light Box effect

The back-printing of Plexi with a diffuse white primer creates a transparency that can be used in a light box.

Extra-large dimensions up to 200 x 300 cm.

Lift Lighting
In this example the LED lighting inside a lift with a decorative opal Plexi image.

In this way the impression of a larger space is also created visually.

Weight of Plexi
3 mm Plexi weighs 3.60 kg/m2
6 mm Plexi weighs 7.2 kg/m2
10 mm Plexi weighs 11.90 kg/m2

Elevator paneling with printed Plexiglas panels —

Some examples of size comparisons

Some examples of size comparisons —

AuthenticPhoto is certified by Hahnemühle, Canson, Ilford, ChromaLuxe and Epson Digigraphie

Additional Services

Testprints & Softproof

Testprint in A4 format (full image).
1:1 scale test (± 30 x 50 cm).
Softproof by email.


Adaptation, retouching and correction of your image. Optimization of the image according to the chosen product.


Organization of the hanging of your images after production and delivery.

Shipping & Delivery

Custom packaging depending on the delivery method. The goods are guaranteed by AuthenticPhoto if we take care of the shipping.


Rue Saint-Bernard 9
1060 Brussels — Belgium

Opening Hours

Monday-Thursday: 09-17h
Friday: 09-16h

Online: 24/7


Payment Methods